There are many reasons for why a computer won’t start, but often very few solutions about how to fix a computer that won’t turn on. No matter what is the cause, it will be very frustrating to find a computer cannot start up at all. Now, after talking about how to fix Windows blue screen IRQL_NOT_LESS_OR_EQUAL, I will sum you up some common solutions to troubleshoot and fix computer won’t start problem.
When the computer won’t start, you can turn it off and back a few minutes later. But, you have to make sure that all your wires in the front and back I/O panels are securely plugged in tightly and properly.
If the computer simply does not turn on, or you just hang at a screen with white writing and a black background, and does not say “Loading Windows” anywhere in it, there is no doubt a hardware problem. At this time, you should restart it and get into BIOS. Here, you are able to set everything back to normal by directly selecting the “restore to factory settings” option. This button is usually next to the back of the bios and is lodged between “exit and save changes” and “exit and discard changes.” A simple click on it most of the time helps you to turn on your computer correctly without problems.
If you have followed the above steps, but the computer still won’t start, you can take the little battery out of the motherboard and wait for about 2 or 3 minutes for it to fully discharge. But it is best that you should have the power cord unplugged to do this. If you know which jumper on your motherboard is the clear CMOS jumper, you can just move it to the other two pins and wait 5-10 seconds to clear your CMOS. Also, you can directly take them out, lay them on a table, and put them back in. Then, start the computer again and I believe you can turn on the computer correctly as usual.
Once you are able to start up the computer, it is highly recommended that you can totally wipe out spyware and malware from your computer. Spyware is notorious for it has the ability to infiltrate into your computer, drastically slow down your system performance, severely damage your crucial system component and transmit your private or business files to insecure remote servers for commercial or personal purposes. To completely remove spyware and stop computer won’t boot up problem, you should have to enable a reliable spyware removal tool on your computer which has the power to fully detect, block and remove Spyware, Adware, Keyloggers, Trojans, Worms, Hijackers, Rootkits, Password Stealers, Tracking Threats, Rogue Antispyware and other Malware attacks.
Also, you should fix all corrupted system registry entries. System registry errors are the core reasons of why your computer won’t start. We all know that registry has significance importance in stable Windows running, and that’s why, any improper modification or a minor mistake in the registry may result in problems just like computer won’t boot up at all. Besides, playing as the main component of the Windows-based operating system, some errors within the registry database can also bring in some other errors to the computer. So, just download and run a professional registry cleaning utility on the PC. It helps to ensure smooth computer turn on and running correctly all the time.
Computer won’t start? Try the above steps first before rushing to a PC repair store. This way, you will not only fix a computer that won’t turn on at all by yourself, but also save your time & money at the same time.
- Computer error code 646 - How do I fix error code 646 for Windows update?
- Code 10 device cannot start - Solve computer error code 10 quickly
- Trojan.Stabuniq Removal Instruction - Simple Ways to Get Rid of Trojan.Stabuniq
- Searchwebresults.com - How to Remove Searchwebresults.com from Your Browser
- How Can I Remove Backdoor:Win32/RDPopen from Windows System
- Computer shuts down randomly - What to do when computer keeps shutting down unexpectedly?
- How to remove Trojan.Prinimalka from Your Computer
- DriHWP32.dll not found - Detailed causes and solutions to DriHWP32.dll error
- What should you do when getting “An unexpected I/O error has occurred” error message?