BIOHD-8 is a SMART drive error code that usually happens on HP computers. Typically, such an error message appears when SMART thinks your drive is failing and cannot be connected properly. Since this error code appears quite commonly, not all users know why or how to fix it. If you are facing with a similar problem, follow these steps and you may easily fix this HP error code BIOHD-8.
When getting the HP error code BIOHD-8, check and make sure that the hard drive is not faulty access the BIOS. It is quite common that an incorrect BIOS setting can stop you from starting up the HP computer or running a diagnosis process successfully. You can follow this to reset it to the default settings:
* Restart the computer and press “Delete” to enter BIOS.
* Go to the flap to the right (dunno which one).
*Choose “System defaults”, save and exit.
If you still get the error code BIOHD-8 message after checking & resetting the BIOS settings, it is highly recommended that you can rebuild your Boot Configuration Data (BCD). If it goes corrupt, you will no doubt get the annoying BIOHD-8 error message. To do this, just follow steps here:
*Put the Windows installation disc in the disc drive, and boot up the computer.
*Press a key when you are prompted to start your PC from a disk. *Select a language, a time, a currency, a keyboard or an input method, and then click “Next” to continue.
*Click Repair your computer.
*Here, you should select the operating system that you want to repair, and click “Next”.
*While you are in the System Recovery Options dialog box, click Command Prompt.
*Type Bootrec.exe in the box, and then press ENTER.
*Type bootrec /RebuildBcd, and press Enter.
*Then, you can follow the on-screen step to finish the process of rebuilding BCD on your computer.
By the way, you’d better check and make sure all system files are clean & compact on the computer. If a file is mis-deleted, corrupt or broken and cannot be correctly accessed by the Windows, an error code BIOHD-8 could happen when you are trying to boot up the computer or load a certain program. By the way, a file corruption is the main cause for many PC issues like wsock32.dll not found. At this time, just go to Start, Run, type “sfc/scannow” within the command and press Enter to go. Then, the System File Checker (sfc) will automatically scan the whole system and replace any corrupt, broken system file version.
Finally, run a good registry cleaner to fix any invalid entries and remove any orphaned entries that may be left behind after an incomplete program install or uninstall. Playing as the main component of the Windows-based operating system, an error within the registry can severely affect the smooth running of the PC, stopping from accessing some required entries and finally bringing in an error code BIOHD-8 message in booting up the PC. A registry cleaner will completely scan the whole PC and repair all errors causing the access violation error within minutes.
By following the above instructions, you will be able to troubleshoot and fix your PC from error code BIOHD-8. If fail, it is highly recommended to contact the HP customer support team and explain the problem, the tech will solve the problem for you!
- Vista Internet Security 2013 - How to Remove Vista Internet Security 2013 instantly
- Effective Anti Trojan Elite Uninstall Ways - How to Fully Remove Anti Trojan Elite from PC
- How to Uninstall Aide PDF to DXF Converter Effectively? - Recommended Aide PDF to DXF Converter Removal Method
- iTunes error -50 – How can you fix iTunes error -50 instantly?
- Computer error code 646 - How do I fix error code 646 for Windows update?
- Guide to Help You Easily Uninstall Nero 8 Ultra Edition from Computer
- Adware.Solimba - How to Remove Adware.Solimba quickly
- No boot sector installed - Causes and solutions
- How to Remove JS/Redir.D quickly and easily